Hawke Transit System
Accessories and Installation Tools



Find out all the information about Hawke´s accessories and installation tools, to complete and help in the installations of the Hawke´s transit systems.






REQUEST INFORMATION
Feel free to contact our team in order to any question


Stayplates

Stayplates ensure the block in a Hawke rectangular system (tolerant and blank ones) are fixed in position after compression.



REQUEST more INFORMATION


Stayplates (ap)


Stayplates ensure the block in a Hawke rectangular system (tolerant and blank ones) are fixed in position after compression. For presure application in excess of 3.5 bar



REQUEST more INFORMATION


Compression tool

The re-usable compression tool is designed to apply compression to the system before placing the endpacker within the frame.
Reduces installation time by up to 50%.



REQUEST more INFORMATION


Pulling Device


The 980 Puller tool is a re-usable piece of equipment which is used to aid extraction of compression system.



REQUEST more INFORMATION


Backing Plate

Hawke Backing Plates are used in conjuction with Hawke flanged frames to add finished appereance to an installation.



REQUEST more INFORMATION


Clamp toll


The purpose of this tool is to hold the position of the already installed blocks when the transit block installation is not completely done. This is also used to install the blocks (without cables).

Also, with this tool you can achieve a much greater comfort in a horizontal transit installation.



REQUEST more INFORMATION


Polystyrene Moulds

Hawke Polystyrene Moulds are used to protect the inside of a frame during a casted installation in a floor or wall.



REQUEST more INFORMATION


Lubricant


The 967 Silicone Lubricant is use to aid the installation of blocks which are tightly fitted.

The silicone remains soft a low temperatures and will not dry out over long periods of time ensuring that future modifications to the transit will not be impeded.

Hawke recommends 1 our Lubricant Ref.967 for each 3 apertures.



REQUEST more INFORMATION


Hawke Intumescent Mastic 966


The 966 Mastic is necessary when frames HCX are to be bolted onto or into a structure, Hawke 966 Mastic should be place between the flange of the frame and the structure to ensure fire/smoke/gas/water tight seal, see installation instructions in product catalogue.

Hawke recommends 1 our Mastic Ref.966 for each 4 apertures.



REQUEST more INFORMATION


Silicone Ref-962


Our new silicone is used for sealing our HMFX range marine frames. The application method can be seen at the bottom of this page:



request more information


Welding Fixing Tool


Welding Fixing Tool (Ref.974) Tool is used to facilitate the welding process on a marine frame.



Request more information

QA System

ISO Certified and Testing Facilities

Hawke Transit System-HTS is credited by Lloyd's Register LRQA according to UNE-EN-ISO 9001:2000 and complies with the European Directive of Marine Equipment MED 96/98/EC, for the production of the sealing blocks under the modules B+D.

  QA SYSTEM