Frames/Sleeves

MCT´s - STANDARD





Hawke Transit System frames, both rectangular and circular, are designed for use in marine environments and in civilian environments with maximum sealing guarantees.

 

Feel free to contact our team in order to any question

Rectangular Frames


Hawke Transit Frames are available in mild steel, stainless steel and aluminium.

For specialist applications frames can be manufactured to suit customers specific requirements.

They can be manufactured as open frames for applications where the cable is already installed.

All possible combinations of dimensions and openings are supplied.




HAWKE MARINE FRAMES (HMX) 

Hawke Marine frames are normally welded into decks and bulkheads in order to provide a secure anchorage for the services which pass through them.

Fully certified for Marine applications.

Easily installable without the need for special tools or highly qualified personnel. Made of 60 x 10 mm. bar



HAWKE CIVIL FRAMES (HCX)

Hawke Civil frames are normally cast in concrete or bolted to walls and floors of buildings in order to provide secure anchorage for any services which will pass through them. Made of  60 x 60 x 6 mm. bar

HMX 


Type HMX (For Marine Applications), thickness 10mm without Flange. These types of frames are to be welded to the bulk or deck following the installation instructions of Hawke MCT catalogue.



DATA SHEET

HMFX 


Has a 60mm wide flange and is available in the same materials and finishes as HMX frames. For overall dimensions of HMFX frames add 120mm (allowance for flange) to those given for standard HMX frames.



DATA SHEET

HMEX


A standard HMX frame extended using a welded collar. For use in corrugated bilkheads or to fit the frame above deck level. For overall dimensions of HMEX frames add 20mm to external measurements of Standard HMX frames.



DATA SHEET

HMBX 


For sealing cable routes in uninsulated HO rated areas or similar applications. Add 20mm to external dimensions of standard HMX frames to determinate overall width and height.



DATA SHEET

HMRX 


For stressed area applications, end fillet pieces with radius corners are added to the HMX frame.



DATA SHEET

HMCX 


Marine Frames With Round R30 Corners. Very useful for narrow areas in bulkheads and decks. Our HMCX has multidimensional openings.



DATA SHEET

Round


Hawke round Frames effectively seal cables and pipes passing through circular apertures, and pressure seal against fire, water and gas, etc. The seal is formed by tightening the compression bolts which expand the system radially, this causes pressure to be exerted against the aperture wall and closes down the tolerant blocks.




Materials:

Mild Steel.
Stainless Steel.
Aluminium.



Surface treatments:

Different marine paints / primers.
Electro zinc plated.
Hot dip galvanized.






REQUEST INFORMATION


Round Frame


Hawke round Frames effectively seal cables and pipes passing through circular apertures, and pressure seal against fire, water and gas, etc. The seal is formed by tightening the compression bolts which expand the system radially, this causes pressure to be exerted against the aperture wall and closes down the tolerant blocks.



DATA SHEET

QA System

ISO Certified and Testing Facilities

Hawke Transit System-HTS is credited by Lloyd's Register LRQA according to UNE-EN-ISO 9001:2000 and complies with the European Directive of Marine Equipment MED 96/98/EC, for the production of the sealing blocks under the modules B+D.

  QA SYSTEM